|山东模具|山东铝材模具网|铝型材|挤压模具设计|挤压模具设计培训|挤压模具设计修模图书|

中国铝材模具网_着力打造中国最专业的铝型材挤压模具设计培训交流平台

铝材挤压模具类型及组成中英文对照

时间:2014-04-17 11:34来源:挤压模具设计培训 作者:www.365aps.com 点击:
三種主要铝型材模具類型 Three Main Die Types 平模 Solid die 平模主要用來擠出沒有穴孔的型材,此種模具的擠壓速度一般都狠快
(责任编辑:山东铝材模具网 请勿随意转载本站原创文章,如有转载请勿必带上本站链接,谢谢您的支持和配合!)
三种主要铝型材模具类型 Three Main Die Types
平模 Solid die
平模主要用来挤出没有穴孔的型材,此种模具的挤压速度一般都狠快。
半空心模 Semihollow die
半空心模主要用来挤出有半开口孔穴的型材。此种型材一般需要很大的压力才能有效地挤出型材。
空心分流模 Hollow die (with cap and mandrel)
空心模主要用来挤出管材,或包括一个以上穴孔的型材. 一般包括上模和下模。下模主要是决定管材内里的型状,而上模则规管外型。

空心分流 Hollow Shape

半空心 Semi-Hollow Shape

平模 Solid Shape
 
铝挤压模具由以下部分组成 Die Assembly

正模 die

模垫 backer (occasionally not required because of die thickness)

模套 die ring

前垫 bolster

后垫 shim or sub-bolster (used to create the needed thickness for the die assembly, and is not required if there is already enough depth)
  



------分隔线----------------------------
山东铝材模具网栏目列表
挤压模具设计培训推荐文章